Page 1 sur 1

replacing engine mounts (XU92C)

Posté : 25 févr. 2012, 22:56
par amilo123
My engine is vibrating at idle, not much, but I saw that engine mounts are cheap and I would like to replace one of them myself. I am talking about the one on the left side of the engine, the one at the top. Is it hard to replace? Could I do it myself? I think that this engine has 3 of them right (2 more on the bottom)? Would it make any difference if I changed only this one?

Re: replacing engine mounts (XU92C)

Posté : 25 févr. 2012, 23:01
par alargeau
If I'm correct, you just need to lift the engine in order to replace it.

Re: replacing engine mounts (XU92C)

Posté : 25 févr. 2012, 23:33
par thefunkyboy
It is easy to replace but when your engine vibrates, it is generally due to the one in the bottom, near the right "gimbal"

Re: replacing engine mounts (XU92C)

Posté : 26 févr. 2012, 00:01
par amilo123
thefunkyboy a écrit :It is easy to replace but when your engine vibrates, it is generally due to the one in the bottom, near the right "gimbal"
So should I leave it alone then?

Re: replacing engine mounts (XU92C)

Posté : 26 févr. 2012, 00:08
par thefunkyboy
Could you take some picture? Generally, the one near the gearbox tells you if you need to change them or if it is not hurry.