replacing engine mounts (XU92C)
- amilo123
- Membre SR
- Messages : 222
- Enregistré le : 20 mars 2011, 14:13
- Modèle(s) 309 : GT
- Localisation : Bucharest, Romania
- Contact :
replacing engine mounts (XU92C)
My engine is vibrating at idle, not much, but I saw that engine mounts are cheap and I would like to replace one of them myself. I am talking about the one on the left side of the engine, the one at the top. Is it hard to replace? Could I do it myself? I think that this engine has 3 of them right (2 more on the bottom)? Would it make any difference if I changed only this one?
1986 Peugeot 309GT 1.9l ~201 000 km
- alargeau
- ADHÉRENT
- Messages : 7581
- Enregistré le : 24 mars 2006, 16:12
- Modèle(s) 309 : SL - GTI
- Localisation : Var
- Contact :
Re: replacing engine mounts (XU92C)
If I'm correct, you just need to lift the engine in order to replace it.
- thefunkyboy
- RESP. SORTIES
- Messages : 14795
- Enregistré le : 07 janv. 2008, 21:11
- Localisation : Toulouse
Re: replacing engine mounts (XU92C)
It is easy to replace but when your engine vibrates, it is generally due to the one in the bottom, near the right "gimbal"
GB:
http://www.peugeot309.net/En/Forum/sear ... d=newposts" onclick="window.open(this.href);return false;
http://www.peugeot309.net/En/Forum/sear ... d=newposts" onclick="window.open(this.href);return false;
- amilo123
- Membre SR
- Messages : 222
- Enregistré le : 20 mars 2011, 14:13
- Modèle(s) 309 : GT
- Localisation : Bucharest, Romania
- Contact :
Re: replacing engine mounts (XU92C)
So should I leave it alone then?thefunkyboy a écrit :It is easy to replace but when your engine vibrates, it is generally due to the one in the bottom, near the right "gimbal"
1986 Peugeot 309GT 1.9l ~201 000 km
- thefunkyboy
- RESP. SORTIES
- Messages : 14795
- Enregistré le : 07 janv. 2008, 21:11
- Localisation : Toulouse
Re: replacing engine mounts (XU92C)
Could you take some picture? Generally, the one near the gearbox tells you if you need to change them or if it is not hurry.
GB:
http://www.peugeot309.net/En/Forum/sear ... d=newposts" onclick="window.open(this.href);return false;
http://www.peugeot309.net/En/Forum/sear ... d=newposts" onclick="window.open(this.href);return false;