#113169 SENDER UNIT
- sedio309
- ADHÉRENT
- Messages : 142
- Enregistré le : 28 oct. 2010, 22:07
- Modèle(s) 309 : GT
- Localisation : Montevideo, Uruguay
#113169 SENDER UNIT
Hi.....I need one of this
#113169 SENDER UNIT (gauge)
it's the Oil Preassure Sensor (the one of the gauge) as someone told me, I can find it new but in first option I want one cheaper..
Thanks
Salu2
Claudio
#113169 SENDER UNIT (gauge)
it's the Oil Preassure Sensor (the one of the gauge) as someone told me, I can find it new but in first option I want one cheaper..
Thanks
Salu2
Claudio
- moustik76133
- TRÉSORIER
- Messages : 6124
- Enregistré le : 08 janv. 2008, 18:52
- Localisation : épouville city:76133
Re: #113169 SENDER UNIT
this one :?
http://www.intermotor.co.uk/index.html? ... m4g3r79mf3" onclick="window.open(this.href);return false;
http://www.intermotor.co.uk/index.html? ... m4g3r79mf3" onclick="window.open(this.href);return false;
- sedio309
- ADHÉRENT
- Messages : 142
- Enregistré le : 28 oct. 2010, 22:07
- Modèle(s) 309 : GT
- Localisation : Montevideo, Uruguay
Re: #113169 SENDER UNIT
I can reach the page....could you check the link??
Thanks
Thanks
- sedio309
- ADHÉRENT
- Messages : 142
- Enregistré le : 28 oct. 2010, 22:07
- Modèle(s) 309 : GT
- Localisation : Montevideo, Uruguay
Re: #113169 SENDER UNIT
could someone tell me if piece #1131 71 from 405 Mi16 2L is usefull??
I know the hole in the block is smaller (10x100vs16x150 from the sensor) but I can use an adaptator to fit....but mi question is if can measure the preassure in good way as the 1.9 sensor...
I know the hole in the block is smaller (10x100vs16x150 from the sensor) but I can use an adaptator to fit....but mi question is if can measure the preassure in good way as the 1.9 sensor...
- sedio309
- ADHÉRENT
- Messages : 142
- Enregistré le : 28 oct. 2010, 22:07
- Modèle(s) 309 : GT
- Localisation : Montevideo, Uruguay
Re: #113169 SENDER UNIT
I have found the sensor...Thanks!